PVELITE V5安装说明

Install docs
=============
1) 运行 setup.exe 开始安装
   序列号是 PV500-7538511-F145587-45082 
安裝時HASP的key我是選选White ESL(可能哪一種顏色都可以) ,装完不要重启动

2) CRACK目录下的HASP Emulator 98和Hasp Emulator NT,一个是针对windows 98 
另一个是针对  NT/2000/XP
下面以win2000系统为例说一下如何解密
3) 安装crack\Hasp Emulator NT\HASPEmulPPEw2k.EXE,装完不要重启动,将
crack\Hasp Emulator NT\HASP.EMUL.PPE.V.2.07.D027.NT.W2K.XP.patch.rar里面的
haspnt.sys拷贝到C:\WINNT\SYSTEM32\drivers下,替换同名文件.
再运行crack\Dongle Dumps\pve xp crack1.reg,将内容添加到注册表,再重启动系统,就完成解密.
以上安装方法是在机器没装HASP驱动情况下的安装方法,如果机器装过其它软件的HASP驱动,可能要
先卸掉HASP才能继续安装
到这里,软件就能启动开了,下面的你可看可不看了.好象是打补丁及需要注意方面吧
4) Double click on the appropriate reg files inside the dongle dump
   folder inside the crack folder. This installs the dongle dump in 
   the windows registry.

4) Now reboot your computer

5) Fireup Haspemulator. Install emulator driver. This will point to 
   a default c:\Program Files installation. In case you are installing
   to a different drive, remember to modify the install path in the 
   .reg file

6) Open emulator, you should see the hardware lock now installed and
   working. The dongle dump is saved in the windows registry.

7) Fireup PV-Elite. It should work okay. Open a couple of menus just to
   check if the dongle really works (hehe - just kidding!)

8) Close PV-Elite and install the updates for the patches folder 
   as under:

   March 2003 - then August 2003 and last October 2003.

9) Fireup PV-Elite again. The startup screen still shows August 2003
   but the build is October 2003 (minor fixes to code).

10) Nothing from the SetupESL folder needs to be installed...

10) Have fun!